Talulah™ Ballast Pumps
Industries : Recreational Marine
Specifically designed to quickly fill or, when reversed, drain a ballast tank. Capable of pumping fresh or sea water, the pump’s robust design lends itself to High Performance and High Output for intermittent duty usage. The pumps are reversible, and has a built-in thermal overload for added protection.
High Performance in a Smaller Package!
- F4B-1207 Ballast Pump
- Built in Thermal Overload Protection with automatic reset upon cooling
- Ideal for system with tank monitoring for overfill and protection against dry-run while emptying
- Retrofit Ready for existing wake and watersport boats with approved electrical and plumbing specifications
- Improved impeller compounds designed for short duration *dry-run events to keep you on the water longer
- High Performance and High Output for intermittent duty cycles
- Professional installation recommended (Acc. to ISO 10133)
- Best used with fully charged battery banks and alternators running
- Limited 3 Year Warranty
*Dry-Run: when the pump runs out of water, still moistened with residual water or lubricated with Johnson Pump Impeller Lube. Maximum dry-run condition of 30 seconds without harming impeller.
Technical Data
| Talulah Impeller Kit | 09-824P-2 |
| Flow | 13.5 GPM |
| Voltage | 13.6VDC |
| Connection | External 1" standard hose Internal 1/2" NPT (female) |
| Minimum Hose Size | 1" (Ø25.4 mm) |
| Standards | Meets ISO 8846 & SAE J1171 |
| Degree of Protection | IP 54 |
| Wire Size | Min. 12 AWG |
| Fuse Size | 25A |
| Amp Draw @ Pumping | 14A |
| Amp Draw @ Reversal | Up to 18A |
See this product in the Johnson Pump Marine Catalog: US ‖ GB ‖ DE ‖ ES ‖ FI ‖ SV
Talulah HF (High Flow) The defining high performance ballast pump for today’s wake and watersport boats
- Built in Thermal Overload Protection with automatic reset upon cooling
- Ideal for system with tank monitoring for overfill and protection against dry-run while emptying
- Retrofit Ready for existing wake and watersport boats with approved electrical and plumbing specifications
- Improved impeller compounds designed for short duration *dry-run events to keep you on the water longer
- High Performance and High Output for intermittent duty cycles
- Professional installation recommended (Acc. to ISO 10133)
- Best used with fully charged battery banks and alternators running
- Limited 3 Year Warranty
*Dry-Run: when the pump runs out of water, still moistened with residual water or lubricated with Johnson Pump Impeller Lube. Maximum dry-run condition of 30 seconds without harming impeller.
Technical Data
| Talulah Impeller Kit | 09-849P-2 |
| Flow | 30 GPM (1ft lift) 1 1/2" Hose |
| Voltage | 13.6VDC |
| Connection | External 1 1/2" NPTF |
| Minimum Hose Size | 1 1/2" (Ø38 mm) |
| Standards | Meets ISO 8846 & SAE J1171 |
| Degree of Protection | IP 54 |
| Wire Size | Min. 12 AWG |
| Fuse Size | 50A |
| Amp Draw @ Pumping | 25A |
| Amp Draw @ Reversal | Up to 45A |
