DC Power Units
12V DC
Manual Operated Power Up/Gravity Down
This unit is for power up/hold/gravity down applications. In one direction the manual handle starts unit to power up. In the other direction, the manual handle provides gravity down. In the neutral position, the unit holds steady. The unit features an adjustable relief valve, cartridge hold & lower valves, allowing for easy field service and interchangeability. A pressure compensated flow control for lower function is optional.
Can be assembled using standard Pick-A-Pack parts.
Can be made metric by using KN10 endhead.
View Catalog - DC-10SF - US
12V DC
Solenoid Operated Power Up/Gravity Down
This unit is for power up-hold-gravity down applications. The remote controller allows an operator to power up & gravity down the unit. In the off position, the unit holds steady. The unit features an adjustable relief valve, cartridge hold & lower valves, allowing for easy field service & interchangeability. A pressure compensated flow control for lower function is optional.
Can be assembled using standard Pick-A-Pack parts.
Can be made metric by using KN10 endhead.
View Catalog - DC-20SF - US
24V DC
Material Handling Solenoid Operated Power Up/Gravity Down
Designed for low-lift pallet trucks. The units have a 3-way circuit for raise-hold-lower functions & are used with a single acting cylinder. This unit is plumbed for vertical mounting & is interchangeable with other manufacturer's power packs.
View Catalog - DC-24MH - US
12V DC
Auxiliary Power Unit Relief & Check Valve Only
Intended to be used with remote directional control valving & reservoir. This unit has an adjustable relief valve & outlet check valve. For applications such as back-up hydraulic power for truck mounted/mobile equipment. It can also be used to power material handling functions & other intermittent duty applications.
View Catalog - DC-30APU - US
12V DC
Check & Relief Valve Power Unit
This unit provides flow & pressure for customer specific applications. The unit can be used for power up-hold-gravity down, or power up-hold-power down applications, dependent on customer-supplied valving. Features include an adjustable relief valve & cartridge check valve.
View Catalog - DC-30SF - US
12V DC
Solenoid Operated Power Up/Power Down
This unit is for power up-hold-power down applications. The controller (either customer-supplied or supplied with unit) will power the unit in both directions. The unit will hold load in the off position. Pressure compensated flow control allows smooth-running functions in both directions. Features includes a fixed relief valve & cartridge valves for easy field service & interchangeability.
View Catalog - DC-41DT - US
12V DC
Solenoid Operated Power Up/Power Down
This unit is for power up-hold-power down applications. The controller allows an operator to power the unit in both directions. In the off position, the unit holds steady. Features include an adjustable relief valve & load holding Pilot-Operated check valves.
View Catalog - DC-60SF - US
12V DC
Bale Spike Solenoid Operated Power Up/Power Down
Designed primarily to operate tines which pick up round bales. Incorporates a 2 position, 4-way cartridge valve & double pilot-operated checks to control a double acting cylinder, to lift-hold-lower the bale.
View Catalog - DC-70BS - US
12V DC
Snow Plow Solenoid Operated Power Angle & Lift/Gravity Down
Designed to operate all functions of a power operated angling snow plow. The unit includes a lift-hold-gravity lower function for the blade, with a continuous "float" capability. A directional valve controls power angling of the blade, 2 cross-over reliefs protect the system from damage should the blade to be obstructed while plowing.
View Catalog - DC-80SP - US
12V DC
Relief Valve Only
This unit provides flow & pressure for customer specific applications. The unit can be used on double acting applications. Features include an adjustable relief valve.
View Catalog - DC-90SF - US